ERTC ad banner
Landfill gas extraction pipework

The Design of Landfill Gas Extraction Pipework

Landfill gas extraction pipeworkThe landfill gas extraction pipework is the first element of all landfill gas recovery systems.

The purpose of the gas collection system is to extract the maximum possible volume of gas but to leave the condensate behind. Landfill gas is warm and saturated with water so it produces a lot of condensate as it passes through the cooler ground, once it leaves the waste.

The proprietary make of well head used by many of the United Kingdom's landfill operators monitors and regulates the gas flow from each well, and also contains a barometric leg for draining condensate away.  The gas flow regulation device used is best if it is specified to be sleeve valve type, which provides much finer adjustment than a butterfly valve. This is especially the case at low flows, and most importantly this more expensive valve choice does not restrict the condensate as can a butterfly valve.

The well heads are installed in line on the lateral pipe system of the landfill gas extraction pipework.   Choosing the correct diameter of pipe for the various sections of the system is of prime importance, since the velocity of the gas flow against the gradient of the pipe run is a critical factor in successful de-watering. Experienced landfill gas extraction pipework designers choose their pipe diameters according to experience and on some occasions from modelling the gas flow rates.

[box type=”note” style=”rounded” border=”full”]Note: The above video provides a means of calculating landfill gas collection pipe diameters for LFG Collection Projects.[/box]

Pipelines are carefully laid to falls from well to well, in order that the maximum amount of condensate is drained away via the well heads or other de-watering devices. The experienced landfill gas extraction pipework designer will assess the minimum fall according to the anticipated maximum settlement within the design life for the pipes. The fall will need to comfortably exceed the loss of height at the top of each pipe run after settlement and still provide a residual fall capable of allowing all condensate to continue to drain to the condensate collection points, also known as “knock-out pots”. if the designer fails to allow adequate falls in this manner, the landfill gas extraction pipework design will fail due to blockage of the horizontal interconnecting gas collection pipes when condensate water builds up.

It is a false economy to skimp on the number of individual pipelines used to transport the gas to the pumping station and generally better to have duplicate parallel pipe runs, rather than just one large diameter pipe collecting all of a field.

This gives flexibility which is necessary e.g. if repairs have to be carried out due to damage by machinery or settlement.   It is also good practice to have the collection system divided in to sections. This is due to the fact that on an operational site it is sometimes necessary to remove and re-site sections of the collection system as filling of the site progresses, and if one pipe length of the landfill gas extraction pipework gets damaged at least part of the system will remain operational while repairs take place.

These are just a few of the considerations which a landfill gas extraction pipework designer must consider when designing the landfill gas extraction pipework for a landfill gas extraction system. It is recommended that all those seeking to install a landfill gas extraction and collection system engage an experienced designer, or a design and build contractor to do the design work.

 


You May Also Like These Topics...
LFG methane capture featured image.

Landfill Methane Capture: The Global Warming Reduction “Quick Win” You've Never Heard Of

Concerned about the menacing effects of landfill gas on our environment? You're not alone, but it's not as bad as it might be where a landfill has a well-engineered Landfill Methane Capture system installed. In fact, we go so far as to say that landfill methane capture and utilisation is the global warming reduction “Quick […]

A landfill collection system shown in 3D cut-away style. By US EPA - LMOP (US EPA - LMOP) [Public domain], via Wikimedia Commons.

Landfill Gas Collection Systems Defined – UK Facts and Myths

Go no further to read all about landfill gas collection systems. LFG collection systems are defined in the next section, followed by a UK landfill gas collection history. Those are the facts, now for the myths! If you scroll further down on this page we explain some myths about Landfill Gas Collection Systems, and a truth. […]

Landfill gas extraction equipment

Landfill Gas Extraction Systems and the Equipment Used for Energy Recovery

In this section we discuss landfill gas extraction systems and how the gas collected is used to create renewable energy. It then becomes even more sustainable when the waste heat is then used in combined heat & power (CHP) system. Landfill gas (LFG) is extracted from the landfill by exerting a small negative suction pressure […]

Landfill extraction well image

Landfill Gas Extraction Well Design – An Introduction

It is important that all landfill gas extraction wells (also known as gas extraction boreholes) are designed carefully in accordance with best practice. In this article we have tried to identify the most important aspect of design. We also recommend the United Kingdom reader to consult the UK Environment Agency Publication, “Guidance on the Management […]

Tags: , ,
Previous Post
Landfill gas analysis
Landfill Gas Analysis

Landfill Gas Analysis and Baseline Emissions Determination

Next Post
Trace gases in landfill gas
Landfill Gas Analysis

Trace Gases in Landfill Gas from a Typical United Kingdom Municipal Solid Waste Landfill

Comments

    • Ray Ford
    • March 6, 2019
    Reply

    Which is the best extraction pipe to use?

    • Naveen cardoza
    • July 24, 2020
    Reply

    Can I get a complete drawings of a landfill gas extraction system for reference of an existing gas to energy project.Am an engineer from India.

      • gasser
      • July 24, 2020
      Reply

      Naveen

      It would not be ethical for me as a professional landfill consultant to provide you with the drawings produced for another client. I am surprised that you ask such a question. Drawings are provided for each client and not publically available.

      However, our “Introduction to Landfill Gas Extraction” ebook is available to buy from this website. If you buy it, the design requirements to enable you to design an LFG Extraction System are included. When you have bought it you can email me and ask further questions and I’ll reply with assistance, or if would like a 30-minute consultancy session to talk about the design on Skype or a similar platform I will provide that at no additional cost.

    • John Branstine
    • November 3, 2021
    Reply

    It’s a shame Algea cultivated in Photo Bio Reactors (PBR) isn’t employed to capture CO2 released by methane producers on a permanent basis. The carbon from the garbage will then be returned to the planet via fertiliser, compostable products, and other means.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

0 Shares